Publications
Books & Editorials
ITSC2023 Organizing Committee, "Thermal Spray 2023: Proceedings from the International Thermal Spray Conference," in 2023 International Thermal Spray Conference, Quebec City, Canada, F. Azarmi, X. Chen, H. S. Jazi, H. Koivuluoto, Y. Lau, R. Ortiz-Fernandez, O. Ozdemir, F. Toma, J. Veilleux, and H. Che, Eds., 2023: ASM International, doi: https://doi.org/10.31399/asm.cp.itsc2023fm01.
ITSC2021 Organizing Committee, "Proceedings from the International Thermal Spray Conference," in 2021 International Thermal Spray Conference, Virtual, F. Azarmi, X. Chen, J. Cizek, H. S. Jazi, H. Koiivuluoto, Y. Lau, R. Ortiz-Fernandez, O. Ozdemir, F. Toma, J. Veilleux, and H. Che, Eds., 2021: ASM International, doi: https://doi.org/10.31399/asm.cp.itsc2021fm01.
V. Champagne, O. Ozdemir, and A. Nardi, Eds. Practical Cold Spray. Springer International Publishing, 2021. doi: https://doi.org/10.1007/978-3-030-70056-0.
Book chapters
O. C. Ozdemir, "Process Parameters," in Advances in Cold Spray, D. H. Victor K. Champagne Jr., Mostafa Hassani Gangaraj Ed., 2 ed. Cambridge, MA, USA: Elsevier, 2023, p. 478, doi: https://doi.org/10.1016/B978-0-08-103015-8.00005-0.
O. C. Ozdemir, A. Nardi, A. Birt, V. K. Champagne, D. Helfritch, C. Widener, R. Hrabe, K. Johnson, N. Klotz, and S. Camilleri, "Advancements in Cold Spray," in Practical Cold Spray: Springer, 2021, pp. 311-380, doi: https://doi.org/10.1007/978-3-030-70056-0_9.
O. C. Ozdemir, N. Matthews, D. Helfritch, S. Glass, and G. Ferguson, "Application, Qualification, and Standardization of Cold Spray," in Practical Cold Spray: Springer, 2021, pp. 203-263, doi: https://doi.org/10.1007/978-3-030-70056-0_6.
Nardi, D. Helfritch, O. C. Ozdemir, and V. K. Champagne, "Process Control," in Practical Cold Spray, V. K. Champagne Jr, O. C. Ozdemir, and A. Nardi Eds. Cham: Springer International Publishing, 2021, pp. 265-284, doi: https://doi.org/10.1007/978-3-030-70056-0_7.
Nardi, D. Helfritch, T. Eden, and O. C. Ozdemir, "Cold Spray Economics," in Practical Cold Spray: Springer, 2021, pp. 285-310, doi: https://doi.org/10.1007/978-3-030-70056-0_8.
T. J. Eden, O. C. Ozdemir, and V. K. Champagne, "Process Description," in Practical Cold Spray: Springer, 2021, pp. 27-51, doi: https://doi.org/10.1007/978-3-030-70056-0_2.
V. K. Champagne, D. Helfritch, O. C. Ozdemir, N. Klotz, and R. Hrabe, "Setting Up a Cold Spray Facility," in Practical Cold Spray: Springer, 2021, pp. 53-100, doi: https://doi.org/10.1007/978-3-030-70056-0_3.
Magazine articles
S. Camilleri, A. Duguid, S. Katz, C. Massar, M. McMahon, V. Champagne, O. Özdemir, A. Naccarelli, T. Eden, K. Kannoorpatti, and B. McLean. (2023) What is ‘good’ metal AM? Exploring the industry’s value metrics for production. Metal Additive Manufacturing. 137-149. Available: https://www.metal-am.com/metal-additive-manufacturing-magazine-archive/metal-additive-manufacturing-vol-9-no-1-spring-2023/
patents
Ozdemir, O.C. Internally Cooled Aerodynamically Centralizing Nozzle (ICCN). USPTO. Filing Date 2020. Status: Notice of Allowance and Fees Due (July 2024). Owned by: Northeastern University, Available: https://patents.google.com/patent/US20200376507A1/en
Journal articles
S. E. Julien, N. Hanson, J. Lynch, S. Boese, K. Roberts, T. Padir, O. C. Ozdemir, and S. Müftü, "In Situ Measurement of Track Shape in Cold Spray Deposits," Journal of Thermal Spray Technology, 2024/09/05 2024, https://doi.org/10.1007/s11666-024-01826-z.
K. K. Indu Kumar, M. B. Patel, S. Boese, A. Gouldstone, V. K. Champagne, and O. Ç. Özdemir, "Quantitative Nondestructive Evaluation of Cold Spray Manufactured Aluminum Alloy 6061 and Copper Samples," Journal of Thermal Spray Technology, vol. 33, no. 2, pp. 688-704, 2024/03/01 2024, doi: https://doi.org/10.1007/s11666-024-01738-y.
M. Guerrero-Fernandez, P. Quintero, and O. C. Ozdemir, "Cold Gas Spraying Copper Metal on AlN Ceramics as an Alternative to Thick Direct Bond Copper Substrates for Power Electronics," Journal of Electronic Packaging, vol. 146, no. 4, 2024, doi: https://doi.org/10.1115/1.4065943.
A. Chaudhari, T. Tran, P. Schwartz, S. Boese, O. Ç. Özdemir, and S. Müftü, "Nozzle fouling in cold spray: Material transfer between Ni particles and WC-Co substrates at shallow impact angles and elevated surface temperatures," Surface and Coatings Technology, vol. 492, p. 131157, 2024/09/30/ 2024, doi: https://doi.org/10.1016/j.surfcoat.2024.131157.
O. C. Ozdemir and S. Muftu, "Novel Method of Predicting Deposition Efficiency in Cold Spray by Incorporating Sphericity into a 1D Analytical Model," Journal of Thermal Spray Technology, 2023/01/23 2023, doi: https://doi.org/10.1007/s11666-023-01532-2.
S. E. Julien, A. Nourian-Avval, W. Liang, T. Schwartz, O. C. Ozdemir, and S. Müftü, "Bulk fracture anisotropy in Cold-Sprayed Al 6061 deposits," Engineering Fracture Mechanics, vol. 263, p. 108301, 2022/03/15/ 2022, doi: https://doi.org/10.1016/j.engfracmech.2022.108301.
O. C. Ozdemir, P. Schwartz, S. Muftu, F. C. Thompson, G. A. Crawford, A. T. Nardi, V. K. Champagne, and C. A. Widener, "High Rate Deposition in Cold Spray," Journal of Thermal Spray Technology, pp. 1-14, 2021, doi: https://doi.org/10.1007/S11666-020-01135-1.
O. Ç. Özdemir, J. M. Conahan, and S. Müftü, "Particle Velocimetry, CFD, and the Role of Particle Sphericity in Cold Spray," Coatings, vol. 10, no. 12, p. 1254, 2020, doi: https://doi.org/10.3390/COATINGS10121254.
E. Lin, I. Nault, O. C. Ozdemir, V. K. Champagne, A. Nardi, and S. Müftü, "Thermo-Mechanical Deformation History and the Residual Stress Distribution in Cold Spray," Journal of Thermal Spray Technology, vol. 29, no. 6, pp. 1424-1436, 2020/08/01 2020, doi: https://doi.org/10.1016/j.surfcoat.2021.126835.
E. Lin, Q. Chen, O. C. Ozdemir, V. K. Champagne, and S. Muftu, "Effects of Interface Bonding on the Residual Stresses in Cold-Sprayed Al-6061: A Numerical Investigation.," Journal of Thermal Spray Technology, vol. 28, no. 3, p. 472, 2019, doi: https://doi.org/10.1007/s11666-019-00827-7.
C. A. Widener, O. C. Ozdemir, and M. Carter, "Structural repair using cold spray technology for enhanced sustainability of high value assets," Procedia Manufacturing, vol. 21, pp. 361-368, 2018, doi: https://doi.org/10.1016/j.promfg.2018.02.132.
O. Ozdemir, Q. Chen, S. Muftu, and V. J. Champagne, "Modeling the Continuous Heat Generation in the Cold Spray Coating Process," Journal of Thermal Spray Technology, vol. 28, 2018, doi: https://doi.org/10.1007/S11666-018-0794-Z.
V. S. Bhattiprolu, K. W. Johnson, O. C. Ozdemir, and G. A. Crawford, "Influence of Feedstock Powder and Cold Spray Processing Parameters on Microstructure and Mechanical Properties of Ti-6Al-4V," Surface and Coatings Technology, vol. 335, 2018, doi: https://doi.org/10.1016/J.SURFCOAT.2017.12.014.
M. R. Rokni, C. A. Widener, O. C. Ozdemir, and G. A. Crawford, "Microstructure and Mechanical Properties of Cold Sprayed 6061 Al in As-Sprayed and Heat Treated Condition," Surface and Coatings Technology, vol. 309, pp. 641-650, 2017, doi: https://doi.org/10.1016/j.surfcoat.2016.12.035.
O. C. Ozdemir, C. A. Widener, M. J. Carter, and K. W. Johnson, "Predicting the Effects of Powder Feeding Rates on Particle Impact Conditions and Cold Spray Deposited Coatings," Journal of Thermal Spray Technology, vol. 26, no. 7, pp. 1598-1615, 2017/10/01 2017, doi: https://doi.org/10.1007/s11666-017-0611-0.
O. C. Ozdemir and C. A. Widener, "Influence of Powder Injection Parameters in High-Pressure Cold Spray," Journal of Thermal Spray Technology, journal article vol. 26, no. 7, pp. 1411-1422, August 04 2017, doi: https://doi.org/10.1007/S11666-017-0606-X.
C. A. Widener, M. J. Carter, O. C. Ozdemir, R. H. Hrabe, B. Hoiland, T. E. Stamey, V. K. Champagne, and T. J. Eden, "Application of High-Pressure Cold Spray for an Internal Bore Repair of a Navy Valve Actuator," Journal of Thermal Spray Technology, vol. 25, no. 1-2, pp. 193-201, 2016, doi: https://doi.org/10.1007/S11666-015-0366-4.
O. C. Ozdemir, C. A. Widener, D. Helfritch, and F. Delfanian, "Estimating the Effect of Helium and Nitrogen Mixing on Deposition Efficiency in Cold Spray," Journal of Thermal Spray Technology, vol. 25, no. 4, pp. 660-671, 2016, doi: https://doi.org/10.1007/S11666-016-0394-8.
Intelligent Manufacturing Cells for Modern Cold Spray
(Keynote Talk)
Dr. Ozan Ozdemir
2021 Cold Spray Action Team Meeting
Advanced Computational & Experimental Methods in Cold Spray
Dr. Ozan Ozdemir
Cold Spray Action Team Meeting - 2020
Invited Talks
O. Ç. Özdemir, "Informing Innovation in Machine Technology, Materials, Process Control, and Standardization in Additive Manufacturing through Fundamental Thermofluids Research (Seminar)," presented at the Spring Seminar Series, Worcester, MA, USA, Jan 24, 2024, 2024.
O. C. Ozdemir, "Applied Research at the Intersection of Thermofluids and Additive Manufacturing (Seminar)," presented at the Science on Tap, Boston, MA, 2024.
O. C. Ozdemir, I. Arkhipov, U. Kokal, R. Bokade, K. Kumar, P. Anumandla, C. Pfeiff, M. Wadhwa, M. Patel, S. Muftu, X. Jin, and A. Gouldstone, "In-Situ & Ex-Situ Means for Through Process Control in Cold Spray (Invited Talk)," in Cold Spray Action Team Meeting, Worcester, MA, USA, June 20-23, 2023 2023.
O. C. Ozdemir, "Flexible Advanced Manufacturing Technologies for Industry 4.0 and the Role of Thermal Fluids Sciences in Their Development (Invited TEC Talk)," in Thermal and Fluids Engineering Conference, College Park, MD, USA, March, 26-29, 2023 2023.
O. Ozdemir, E. Lin, and S. Muftu, "Cold Spray Deposition Process Control Guided by Predictive Models (Invited Talk)," in Cold Spray Action Team Meeting, Worcester, MA, June 25-26, 2019 2019: Cold Spray Action Team.
O. C. Ozdemir and C. A. Widener, "Optimization of Particle Feeding Rates in High Pressure Cold Spray (Invited Talk)," presented at the Cold Spray Action Team Meeting, Boston, MA, USA, June 14-15, 2017, 2017.
Conference Papers
Ozan C. Ozdemir, Kishore Kumar Indu Kumar, Mann Baijukumar Patel, and Samuel Boese, "Quantitative and Qualitative Nondestructive Evaluation of Cold Spray Manufactured Copper and Aluminum Samples," in ITSC 2023, vol. Thermal Spray 2023: Proceedings from the International Thermal Spray Conference, pp. 77-84, doi: https://doi.org/10.31399/asm.cp.itsc2023p0077.
Margie Guerrero, Pedro Quintero, and Ozan Cagatay Ozdemir, "Cold Gas Spraying Copper Metal on AlN Ceramics as an Alternative to Thick DBC Substrates for Power Electronics," in ASME 2023 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, vol. ASME 2023 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, V001T07A004, doi: https://doi.org/10.1115/ipack2023-111534.
Ozan Cagatay Ozdemir and Sinan Muftu, "Novel Method of Predicting Deposition Efficiency in Cold Spray by Incorporating Sphericity into 1D Numerical Models," in International Thermal Spray Conference, Vienna, Austria, W. Krommer et al., Eds.: DVS - German Welding Society, pp. 389-394, doi: https://doi.org/10.31399/ASM.CP.ITSC2022P0389.
Joseph M Conahan, Ozan C Ozdemir, Mohammad E Taslim, and Sinan Muftu, "Supersonic Nitrogen and Helium Jet Impingement on a Flat Stationary Surface," in ICHMT DIGITAL LIBRARY ONLINE: Begel House Inc., doi: https://doi.org/10.1615/ICHMT.2022.CONV22.110.
Margie Guerrero, Pedro Quintero, Ozan Ozdemir, and Tricia Schwartz, "Cold Gas Spray of Copper on Aluminum Nitride as Substrate for Power Electronics," in ASME 2021 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, vol. ASME 2021 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, V001T04A002, doi: https://doi.org/10.1115/IPACK2021-69270.
Joseph M. Conahan, Ozan C. Ozdemir, Mohammad E. Taslim, and Sinan Muftu, "A Comparison Between Numerical and Experimental High Reynolds Number Supersonic Jets Generated by Millimeter Scale Converging-Diverging Nozzles," in ASME 2020 International Mechanical Engineering Congress and Exposition, vol. Volume 12: Mechanics of Solids, Structures, and Fluids, V012T12A040, doi: https://doi.org/10.1115/IMECE2020-24170.
Ozan C. Ozdemir, S. Muftu, L. Randaccio, A.T. Nardi, V.K. Jr. Champagne, and C.A. Widener, "High Rate Deposition in Cold Spray," in International Thermal Spray Conference, Yokohama, Japan, F. Azarmi, Ed.: ASM International, doi: https://doi.org/10.31399/ASM.CP.ITSC2019P0001.
M.J. Echeverria, P.O. Quintero, O. Ozdemir, V.K. Champagne, and D. Ibitayo, "On Parameteric Analysis of Cold Spray of Metallic Coating onto Ceramic Substrates Using Damage Evolution Approach," in International Thermal Spray Conference, Yokohama, Japan: ASM International, doi: https://doi.org/10.1007/S11666-019-00827-7.
Qiyong Chen, Enqiang Lin, Victor K. Champagne, Jr, Aaron Nardi, and Sinan Müftü, "Impact Mechanics of Spherical Metallic Particles with Uniformly Distributed Porosity," in ITSC2019, vol. Thermal Spray 2019: Proceedings from the International Thermal Spray Conference, pp. 846-852, doi: 10.31399/asm.cp.itsc2019p0846. [Online]. Available: https://doi.org/10.31399/asm.cp.itsc2019p0846.
Ozan C. Ozdemir, Qiyong Chen, Sinan Muftu, and Victor K. Champagne, Jr., "Modeling the Continuous Heat Generation in the Cold Spray Coating Process," in ITSC2018, vol. Thermal Spray 2018: Proceedings from the International Thermal Spray Conference, pp. 270-277, doi: https://doi.org/10.31399/ASM.CP.ITSC2018P0270. [Online]. Available: https://doi.org/10.31399/asm.cp.itsc2018p0270.
Enqiang Lin, Qiyong Chen, Ozan C. Ozdemir, Sinan Müftü, and Victor K. Champagne, "Effects of Interface Bonding on the Residual Stresses in Cold Sprayed Al-6061: A Numerical Investigation," in ITSC2018, vol. Thermal Spray 2018: Proceedings from the International Thermal Spray Conference, pp. 278-285, doi: https://doi.org/10.31399/asm.cp.itsc2018p0278.
Ozan Ç. Özdemir, Taylor N. Suess, Todd M. Letcher, and Stephen P. Gent, "Investigating the Structural Properties of Corn Stover at Macro and Fiber Levels," in ASME 2013 7th International Conference on Energy Sustainability collocated with the ASME 2013 Heat Transfer Summer Conference and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, vol. ASME 2013 7th International Conference on Energy Sustainability, V001T05A003, doi: https://doi.org/10.1115/es2013-18164.
Ozan Ç. Özdemir, Taylor N. Suess, Todd M. Letcher, and Stephen P. Gent, "Investigating the Rheological Properties of Chopped Corn Stover Biomass in Bulk," in ASME 2013 International Mechanical Engineering Congress and Exposition, vol. Volume 6A: Energy, V06AT07A011, doi: https://doi.org/10.1115/IMECE2013-65018.
Ozan C. Ozdemir, Stephen P. Gent, Taylor N. Suess, and Fereidoon Delfanian, "Investigating the Structural Properties of Corn Stover Biomass," in ASME 2012 International Mechanical Engineering Congress and Exposition, vol. Volume 6: Energy, Parts A and B, pp. 27-36, doi: 10.1115/imece2012-86346. [Online]. Available: https://doi.org/10.1115/IMECE2012-86346.
Conference Presentations
O. C. Ozdemir, S. Muftu, X. Jin, I. Arkhipov, U. Kokal, R. Bokade, S. Duran, M. Patel, A. Vaidya, and E. Chang-Davidson, "Model Informed In-Situ Process Monitoring for 3D Printing in Cold Spray (Talk)," in Cold Spray Action Team Meeting, Worcester, MA, June 11-13, 2024 2024.
S. M. Ozan Çagatay Özdemir, Xiaoning Jin, Ivan Arkhipov, Ugur Kokal, Rohit Bokade, Salih Duran, Mann Patel, Akshay Vaidya, Elizabeth Chang-Davidson, "Model Informed In-situ Process Monitoring for 3D Printing in Cold Spray," in Cold Spray Action Team Meeting, Worcester, MA, USA, 2024: Cold Spray Team.
E. L. S. E. Julien, C. Vundru, Q. Chen, S. Boese, P. Schwartz, K. Roberts, O.C. Ozdemir, S. Müftü, "Residual Stress Buildup in Cold Spray Deposits using a Macroscale Finite Element Deposition Model (Talk)," presented at the 2023 International Conference on Advanced Manufacturing, Washington, DC, USA, October 30 – November 3, 2023, 2023.
O. C. Ozdemir, K. K. Indu Kumar, M. B. Patel, and S. Boese, "Quantitative and Qualitative Nondestructive Evaluation of Cold Spray Manufactured Copper and Aluminum Samples (Talk)," presented at the International Thermal Spray Conference, Quebec City, Quebec, Canada, May 22-25, 2023, 2023.
S. E. Julien, E. Lin, C. Vundru, Q. Chen, S. Boese, P. Schwartz, K. Roberts, O. C. Ozdemir, and S. Müftü, "Residual Stress Buildup in Cold Spray Deposits using a Macroscale Finite Element Deposition Model (Talk)," presented at the 2023 International Thermal Spray Conference and Exposition, Quebec City, Quebec, Canada, May 22-25, 2023, 2023.
U. K. Ivan Arkhipov, Ozan C. Özdemir, "Aeroacoustic Monitoring in Cold Spray Additive Manufacturing (Talk)," presented at the ASTM International Conference on Advanced Manufacturing, Washington, DC, USA, Oct 30-Nov 2, 2023, 2023.
M. Guerrero, P. Quintero, and O. C. Ozdemir, "Cold Gas Spraying Copper Metal on AlN Ceramics as an Alternative to Thick DBC Substrates for Power Electronics (Talk)," in ASME 2023 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, San Diego, CA, USA, Oct 24-26, 2023 2023.
O. C. Ozdemir and S. Muftu, "Novel Method of Predicting Deposition Efficiency in Cold Spray by Incorporating Sphericity into 1D Numerical Models (Talk)," in International Thermal Spray Conference, Vienna, Austria, May 3-6, 2022 2022.
S. H. Julien, N; Lynch, Joseph; Ozdemir, OC; Padir, T; Muftu, S. , "In-Situ Measurement and Simulation of the Shape of a growing Cold Spray Deposit," presented at the International Thermal Spray Conference, Vienna, Austria, May 3-6, 2022, 2022.
J. M. Conahan, O. C. Ozdemir, M. E. Taslim, and S. Muftu, "Supersonic Nitrogen and Helium Jet Impingement on a Flat Stationary Surface (Talk)," in 5th International Symposium on Convective Heat and Mass Transfer, Izmir, Turkey, June 5-10, 2022 2022.
M. Guerrero, P. Quintero, O. Ozdemir, and T. Schwartz, "Cold Gas Spray of Copper on Aluminum Nitride as Substrate for Power Electronics (Talk)," in International Electronic Packaging Technical Conference and Exhibition, Virtual, October 26 – 28, 2021 2021: ASME.
O. C. Ozdemir, S. Muftu, L. Randaccio, A. T. Nardi, V. K. J. Champagne, and C. A. Widener, "High Rate Deposition in Cold Spray (Talk)," in International Thermal Spray Conference, Yokohama, Japan, May 26-29, 2019 2019.
P. O. Q. M.J. Echeverria, O. Ozdemir, V.K. Champagne, and D. Ibitayo, "On Parameteric Analysis of Cold Spray of Metallic Coating onto Ceramic Substrates Using Damage Evolution Approach," in International Thermal Spray Conference, Yokohama, Japan, May 26-30, 2019 2019: ASM International.
O. C. Ozdemir and C. A. Widener, "Better Predictions using 3D CFD to Inform Cold Spray Process Development (Talk)," presented at the North American Cold Spray Conference, Edmonton, AB, Canada, Nov 30-Dec 1, 2016, 2016.
Poster Presentations
Figure: Pranav Anumandla (M.S. Student) wins first place at Cold Spray Action Team Meeting symposium in 2023.
P. Anumandla, C. Pfeiff, N. A. Dermiow, N. H. Moser, R. E. Cook, E. J. Garboczi, and O. C. Ozdemir, "Correlating Pure Titanium Powder Manufacturing Methods and Resultant Particle Morphologies to Microstructural Properties, Particle Flight and Impact Velocity and Deposition Characteristics in Cold Spray (Poster)," in International Thermal Spray Conference, Milan, Italy, April 29, 2024 2024.
Z. Velasquez and O. C. Ozdemir, "Numerical Simulations of Wide Nozzles for Rapidly Manufacturing Large Area Coatings (Poster)," presented at the Cold Spray Action Team Meeting, Worcester, MA, June 20-23, 2023, 2023.
A. Vaidya, S. Muftu, O. Ozdemir, and T. Padir, "Optimizing Cold Spray Additive Manufacturing Using Reinforcement Learning (Poster)," presented at the Cold Spray Action Team Meeting, Worcester, MA, June 20-23, 2023, 2023.
M. Patel, S. Muftu, and O. Ozdemir, "Intelligent Toolpath Planning and Control for Cold Spray Additive Manufacturing (Poster)," in Cold Spray Action Team Meeting, Worcester, MA, June 20-23, 2023 2023.
K. K. I. Kumar, M. B. Patel, and O. C. Ozdemir, "Quantitative Nondestructive Evaluation of Cold Spray Manufactured Aluminum Samples (Poster)," presented at the Cold Spray Action Team Meeting, Worcester, MA, USA, June 20-23, 2023, 2023.
U. Kokal, I. Arkhipov, and O. Ozdemir, "Investigation of Aero-Acoustic Noise in Cold Spray Additive Manufacturing (Poster)," presented at the Cold Spray Action Team Meeting, Worcester, MA, June 20-23, 2023, 2023.
P. Anumandla, C. Pfeiff, N. A. Dermiow, N. H. Moser, R. E. Cook, E. J. Garboczi, and O. C. Ozdemir, "Correlating Pure Titanium Powder Manufacturing Methods and Resultant Particle Morphologies to Microstructural Properties, Particle Flight and Impact Velocity and Deposition Characteristics in Cold Spray (Poster, First Place)," presented at the Cold Spray Action Team Meeting, Worcester, MA, June 20-23, 2023, 2023.
O. C. Ozdemir and C. A. Widener, "Review of Process Characterization and Optimization Efforts in Cold Spray (Poster)," in South Dakota School of Mines and Technology Annual Student Research Symposium, Rapid City, SD, USA, 2015.
O. C. Ozdemir and C. Widener, "Modeling the Flow Dynamics of Cold Spray Deposition (Poster)," presented at the 2014 North American Cold Spray Conference, Bromont, Quebec, Canada, Sept 16-17, 2014, 2014.
O. C. Ozdemir and S. Gent, "Investigating the Structural and Rheological Properties of Corn Stover Biomass (Poster)," presented at the 2013 South Dakota State University Faculty Excellence Day, Brookings, SD, USA, 2013.